Search This Blog

Tuesday, November 29, 2011

Paperweight... not QUITE epic fail.... but close!

The messy and squashy paperweight making zone
Yep, she is fresh from the kiln and unfortunately an all-round dissapointment..... but at least the shape was good!

The difficulties started when my two oxycons did not come up to speed for running the phantom, then the hotplate kept tripping the safety switch on the powerboard....etc.....etc.  In fact if adversity breeds success.... this should have been a whole lot better!!!  LOL

After joining my two 10L chinese oxycons, I realised last night there was an issue.... there is not enough pressure to adequately supply oxy to both the inner and out flame on my phantom.  Using a non-reducing flame was not hot enough to melt the puck and using a reducing flame put horrible "stuff" all over my work.  Indeed having to juggle between these two states caused me in the end to sit my phantom on a neutral small flame cross-flaming with my minor which was the only way things could get hot enough without turning black.
Construction in the stumpsucker to be preheated

The first and most worrying point the lack of heat because a serious issue was when I had peeled and then was trying to heat the puck to vacuum encase.... I was well aware that it was nowhere near hot and runny enough, but after about half an hour of getting increasingly frustrated I decided to plunge it in anyway.... therefore, the sails on the boats were all pressed down quite a bit and one came off looking like a sinking was occurring as you looked at it!  The buoy was enormous... nuff said!

The next issue was the constant need to re-peel the scum off everything, now that was very annoying....VERY!      But.... not nearly as annoying as 1hr of trying to melt the bugger enough to shape in for the final shape!

All in all, it was an excellent experience in trying to fix mistakes.... after this effort, I think the oxygen cylinder and a hot torch will make the whole thing so easy it will be a pleasure to make one.....

I am about to ring around for oxy cylinder hire and fills...... and maybe put two oxycons up for sale!!!!!  Ha ha ha
The finished article..... see the sinking ship at the front of the pic and the enormous buoy at the back... DOH!

3 comments:

  1. I love this! I know that you said it is a mistake, but a wonderful one. :)

    ReplyDelete
  2. You know, I'd be happy to give those "mistakes" a home! I love the way this looks. And, of course, I didn't understand a word you wrote. :)

    ReplyDelete
  3. Nat when I looked at it before reading your post I thought they were flying saucers and a planet.....

    ReplyDelete