Beads... beads and more beads!

Its actually interesting the way my brain works (but scary no doubt LOL).  First I work hard to get beads made, then I flitter off and do some off mandrel work.... then I flitter off again and try out some strange "I had a dream in the middle of the night" sort of torch session.  I really do wish I could exercise some self control and settle down to doing just the one thing each day!!!!

Given my excitement at the fact that Creative Beading Mazagine has just done a profile on yours truly.... not just a wee little mention.... but a whopping three and a half whole pages!!!!  I thought I should actually put some stuff into my etsy store... specifically some beads... just in case anyone wants a Natalie Monkivitch special if you know what I mean!

Well, when I checked the pathetic stash, there was hardly a bead to be found, so off to the torch I have gone... with a mission.... to make a set.  Yep for those that know me well the word set usually sets my knees to knocking and causes a watery feeling the bowels.... Set allergy it might be called (but slack arse lack of self discipline it really is)!!

I am very pleased to say that I did manage not one set.... but two fairly big (for me) sets.  I also got right into the swing of bead making again, not that I had stopped or anything, but I had definitely been distracted.  I have had a real ball with it.  First off here is the first set I made using scrap twisties off my workbench, they are italian soft glass and using the bead press (another thing I am usually averse to).

Green Scrap bead set

After being so pleased at the success of the first set, and with the satisfied feeling that I had actually knuckled down and achieved something, I made some twisties for a second set in different colours.  I hope everyone notices that I EVEN made the spacers to match..... yahoo!!!

Pink, blue and turquoise twistie scrap bead set

Amazingly I have managed to photograph them and list them in my etsy, although I will admit to a fairly lengthy delay in removing them from the mandrels and cleaning them.... I seemed to keep walking past and thinking of something more interesting to do ..... as other glass bead makers will attest... cleaning beads is not the funnest part of the whole process!!!

Of course I went back for a second torch session and made some off mandrel cabochons for some more pocket watches.... I particularly like this dragons eye one.... I don't even know why, but it looked rather cool in real life.  It probably won't sell or anything, but that is part of the problem with making things only to your own tastes... I hardly ever make anything yellow or orange unless it is for a particular person, its time I branched out a bit I reckon!!!

Dragons eye cabochon on pocket watch

 

Two kilns heated and life is goooooood!

Yep at the moment I have two kilns.... thats right, my new lovely big girl I have dubbed Penny (Penny Paragon) and my old, but VERY useful Aim kiln that goes on a trip to Canberra to stay forever more with my little Sister Amanda... sort of sad to see her go, but she is well needed down south and I know my sis will give her some love for sure. 

At the moment I have my Aim set up for the fusing (hence all the fusing related postings this last week...he he he) and it is currently full of glassy goodness once again, only this time I have mixed some dichro in there with the murrini, it'll be interesting to see how it comes out for sure.    Here's a pic of the sheet I threw in with just scrappy bits and pieces on it (twistie, murrini and lumps of "other") and it still sort of came out fairly cool..... I still don't know what I am going to do with this one, maybe stick some rubber bumpies on it and use it as a butter dish for visitors or something like that..... LOL

Scrap canes and murrini fused sheet

I had some interesting results from my fusing tests on small bits of sheet glass.  This one using some clear centred cane came out really interesting, although I am finding that I often like the back view (that has less murrini distortion) much better.  I will show both sides of this one, which I am going to glue a bail to and wear as a pendant I am thinking!  I am actually re-fusing a couple of these tester cabs upside down (now with the clear sheet on the top) to see if that clarifies the integrity of the murrini pictures and maybe adds some depth and magnification too.... I will be keen to check the kiln when they finish for sure!

Rear of cab

Front of cab

 On a non-fusing front, I have been madly making up murrini for Affordable (geeze I am a shocking slacker with keeping up the stock, she might need to take a stick to me I think!)  mostly because I have misplaced a whole lot of my stock murrini (some of which I had even bagged up...doh) and therefore I must pay the price of making extras.... I have really annoyed myself I tell you!

I haven't made any complex murrini for a little while now and the bug is starting to bite..... I have some plans afoot as you can see......

Lets hope it comes out as cute as I see it in my brain.  I am yet to make a murrini that I am totally happy with.... maybe that is just the nature of the beast, but at least I do see myself improving.  You might note that the plans for this owl murrini include using the same component as Loren Stump's fish scale.... I am thinking it will make some ultra-cool feathers YEAH!  Now off to buy a can of corn for shaping the bugger (those little cans are the trick to this shape Loren showed us).

Death of a plate..... but tried again with success!

Sharks vomit plate 1 with hole

Oh yeah..... there is no question, I killed my plate using Sharks Vomit 1 when I tried to slump it into the mold.  It is mostly due to the fact that I totally forgot that I needed to slow down the ramp up heat rate and so when the plate hit about 350deg C there was a muffled clang...well to be honest multiple clangy sounds and when I peeked into the peephole, there it sat.... in MANY parts.  I was not happy, indeed I was rather upset, but as they say... you learn much more from a mistake than you do from getting it right the first time.  I decided that because it was in pieces, I might as well ramp the temp right up and see if some of it will fuse back together.  In fact it did fuse back quite a bit, but left a little hole that I have decided would be a good spot to sit a marble ( I put a circle around the hole zone on the above pic).  The glass also somewhat dripped down the sides of the plate mold and I will have to grind that off.  I am still toying with the idea that I should re-fuse and then try slumping this one again.... just toying at the moment, but if I have to look at it too long like this, it shall feel some heat I promise you!  LOL

Being a big one for getting it right at least once, I decided to spend 4 hrs of my time yesterday to make up another fusing plate using my murrini again.  This time I tried to stick with half decent murrini (ie, not too many clear inclusions etc.) although they are still my rejected ones, I made sure they were as tightly packed as I could get them.  I even pulled some little stringer sized murrini to pop down the gaps and it really paid off.  The glass did not move around very much at all and the fuse came out lovely.  I slumped it late last night and got this beauty out of the kiln this arvo and now have a cute little square plate..... I love it!!!!

Sharks vomit 2 slumped into plate -  sweet success

I have now got a kiln full of  "testers" that I will see how they look when they come out before I think of using them in a larger plate size.  The handy thing is that I will be able to glue on some bails and voila.... instant pendant.  Hopefully they won't be too ugly to be worn and if they are, well I will keep them or donate them to someone who seed beads cabs or something fun like that.

Testers to see what happens in the kiln!

Have a fabulous week, this week is getting things done week for me....... YEAH!